Ice maker stopped making ice? Cubes coming out small, hollow or clumped? Water pooling under the freezer? Super Appliance Repair fixes refrigerator and undercounter ice makers in homes across Seattle, Bellevue and the surrounding Eastside cities.


Most ice maker failures trace back to the water supply, the freezer temperature or a handful of parts. Here is what we see most often in Seattle-area kitchens, and what is usually behind each symptom.
A failed water inlet valve, a frozen fill tube, a dead ice maker module or a freezer running too warm for the ice maker to cycle.
Low water pressure, a clogged water filter or a weak inlet valve that doesn't fill the ice mold all the way.
A cracked fill tube, an inlet valve that overfills, a loose supply line or, on undercounter units, a clogged drain.
Ice that sat too long, a weak door seal letting humid air in, or an auger motor that isn't turning the bin.
A failed auger motor, a stuck dispenser door or solenoid, a bad actuator switch or ice frozen solid in the chute.
The water line is fine, so the fault is usually a frozen fill tube, a failed ice maker module or an ice level sensor stuck reading full.
Usually an overdue water filter, old ice soaking up freezer odors or scale in an undercounter unit. We replace the filter and clean or sanitize as needed.
An inlet valve buzzing with no water behind it, a struggling harvest motor or a worn auger. The sound usually points straight to the part.
A dirty condenser, scale on the evaporator, or a failed water pump or drain pump. Clear-ice machines also need regular cleaning cycles.
A few quick checks can save you a service call. If none of these bring the ice back within a day, the ice maker or its water supply needs a technician.
Make sure the ice maker is switched on and the bail arm or shut-off sensor isn't stuck in the full position.
Check that the water supply valve is open and the water filter isn't overdue. A clogged filter starves the ice maker first.
Look for ice inside the fill tube behind the ice maker, and confirm the freezer is at about 0°F. A warm freezer is a cooling problem, not an ice maker problem.
An ice maker in a freezer door fails differently than one in a built-in column or a standalone clear-ice machine. Our technicians carry the meters, test equipment and manufacturer service data to diagnose all of them.
Freezer-mounted ice makers in top-freezer, bottom-freezer and side-by-side refrigerators, both twist-tray and heated-mold styles.
Ice makers built into the fresh-food door of French door refrigerators, where a separate fan and seal keep the ice compartment frozen.
Standalone and clear-ice machines from Sub-Zero, U-Line, Scotsman, Marvel and others, including drain-pump models.
Panel-ready and column refrigerators from Sub-Zero, Thermador, Miele, Monogram and JennAir, where access and part fit take model-specific know-how.

No guesswork and no surprise charges. Every visit follows the same four steps.
Tell us the brand, model and what the ice maker is doing. The model number is usually on a label inside the fresh-food section, on a side wall or behind the crisper drawers.
Your technician checks water pressure, the inlet valve, the fill tube, the freezer temperature and the ice maker itself, then explains the problem and gives you the repair price before any work starts.
If the part is on hand, we fix it on the first visit. Brand-specific parts for models like Sub-Zero, Thermador or Miele are ordered and installed on a follow-up visit.
We run a test fill, check every water connection we touched for leaks and confirm the freezer is cold enough for steady ice production before we leave.
We repair ice makers in refrigerators from every major manufacturer, with extra depth on the built-in brands common in Seattle and Eastside kitchens. Pick your brand to learn more.
Most ice maker problems are inexpensive to fix. An inlet valve, a fill tube or even a complete replacement ice maker costs a fraction of a new refrigerator, and on a built-in Sub-Zero or Thermador repair is almost always the better call. After the diagnosis, we tell you plainly which option makes sense.

Our technicians work out of Seattle and Bellevue, so most of King and south Snohomish County is a short drive away. Choose your area to see local details, or browse our full service area.
Check availability: (510) 612-5706Don't see your question? Call us at (510) 612-5706 and a technician will help.
It depends on the fault and the part. A water inlet valve or fill tube costs much less than a complete ice maker, an auger motor or an undercounter water pump. Your technician diagnoses the ice maker first and gives you the full repair price before starting any work.
The most common causes are a closed or kinked water line, a clogged water filter, a frozen fill tube, a failed water inlet valve or a freezer that is too warm. If the water dispenser works but there's still no ice, the ice maker itself or its level sensor is the likely fault.
Leaks usually come from a cracked fill tube, an inlet valve that doesn't close fully, a loose connection at the supply line or, on undercounter machines, a blocked drain. Turn off the water supply to the refrigerator until it is repaired to protect your floors.
Most refrigerator ice makers start producing again within a few hours once the freezer is cold, and filling the bin can take a day or more. We recommend throwing out the first few batches after a repair or a new water filter.
If the freezer runs warm or the fresh-food section is warm too, the cause is usually a cooling problem covered by our refrigerator repair service. If everything stays cold and only the ice stops, it's an ice maker repair. Built-in owners can also see our Sub-Zero repair page.
We repair ice makers in Seattle, Bellevue, Kirkland, Redmond, Bothell, Shoreline, Mill Creek, Everett and nearby communities. See our service area page for the full list.
Call or book online and a Super Appliance Repair technician will diagnose your refrigerator or undercounter ice maker in your home.